Ngwaahịa
Onye mbupụ n'ịntanetị China Elt-Sr Ụdị ihe mgbakwunye mmiri na-ebelata mmiri PCE Liquid Slump Njide
Our target is to consolidate and improve the quality and service of ẹdude ngwaahịa, meanwhile always develop new products to meet different customers' demands for Online Exporter China Elt-Sr Type Concrete Additives Water Reducer PCE Liquid Slump Retention, Our products are always supplied to many Otu na ọtụtụ ụlọ ọrụ mmepụta ihe. Ka ọ dị ugbu a, a na-ere ngwaahịa anyị na USA, Italy, Singapore, Malaysia, Russia, Poland na Middle East.
Ebumnuche anyị bụ ijikọ ma melite ogo na ọrụ nke ngwaahịa ndị dị ugbu a, ka ọ dị ugbu a na-emepụta ngwaahịa ọhụrụ mgbe niile iji gboo mkpa ndị ahịa dị iche iche.China Polycarboxylate Superplasticizer, Superplasticizer maka Concrete, Gịnị mere anyị ga-eji mee ihe ndị a? N'ihi na: A, Anyị na-akwụwa aka ọtọ na ntụkwasị obi. Ngwa ahịa anyị nwere oke mma, ọnụ ahịa mara mma, ikike ọkọnọ zuru oke yana ọrụ zuru oke. B, Ọnọdụ ala anyị nwere nnukwu uru. C, Ụdị dị iche iche: Nabata ajụjụ gị, ọ ga-abụ na a ga-enwe ekele dị ukwuu.
Polycarboxylate Superplasticizer PCE Liquid Slump Njide Ụdị
Okwu mmalite
Polycarboxylate Superplasticizer bụ ihe ọhụrụ excogitate gburugburu ebe obibi superplasticizer. Ọ bụ ngwaahịa gbadoro anya, mbelata mmiri dị elu kacha mma, ikike njigide slump dị elu, ọdịnaya alkali dị ala maka ngwaahịa ahụ, yana inwe ike dị elu nwetara ọnụego. N'otu oge ahụ, ọ nwekwara ike melite plastic index nke ọhụrụ ihe, nke mere ka mma ịrụ ọrụ nke ihe mgbapụta na-ewu. Enwere ike iji ya mee ihe n'ọtụtụ ebe na premix nke kọmpụta nkịtị, ihe na-agba agba, ike dị elu na ihe dị ogologo oge. Karịsịa! Enwere ike iji ya na ike dị elu na ihe dị ogologo oge nwere ikike dị mma.
Ihe ngosi
| Ihe | Nkọwapụta |
| Ọdịdị | ìhè odo ma ọ bụ ọcha mmiri mmiri |
| Ọdịnaya siri ike | 40% / 50% |
| Onye na-ebelata mmiri | ≥25% |
| uru pH | 6.5-8.5 |
| Njupụta | 1.10±0.01 g/cm3 |
| Oge mmalite mmalite | -90 - +90 nkeji. |
| Chloride | ≤0.02% |
| Na2SO4 | ≤0.2% |
| Simenti tapawa fluidity | ≥280mm |
Njirimara anụ ahụ & igwe
| Nnwale ihe | Nkọwapụta | Nsonaazụ ule | |
| Ọnụego Mbelata mmiri (%) | ≥25 | 30 | |
| Ọnụego ọbara ọgbụgba na nrụgide nkịtị (%) | ≤60 | 0 | |
| Ọdịnaya ikuku(%) | ≤5.0 | 2.5 | |
| uru njide slump mm | ≥150 | 200 | |
| Oke nke ike mkpakọ(%) | 1d | ≥170 | 243 |
| 3d | ≥160 | 240 | |
| 7d | ≥150 | 220 | |
| 28d | ≥135 | 190 | |
| Usoro nke Mbelata (%) | 28d | ≤105 | 102 |
| Corrosion nke nchara ígwè na-eme ka ọ dị ike | Ọ dịghị | Ọ dịghị | |
Ngwa
1. Mbelata mmiri dị elu: Mgbasa dị mma nwere ike inye mmetụta mbelata mmiri siri ike, ọnụ ọgụgụ mbelata mmiri nke ihe karịrị 40%, ọ na-enye nkwa iji melite arụmọrụ na ike nke ihe, na-echekwa ciment.
2.Easying iji chịkwaa mmepụta ihe: Ịchịkwa oke mbelata mmiri, plasticity na ikuku entraining site n'ịgbanwe ịdị arọ nke molekul nke isi ihe, ogologo na njupụta nke n'akụkụ akụkụ, ụdị nke agbụ n'akụkụ.
3. Elu slump njigide ikike: Magburu onwe slump njigide ikike, karịsịa nwere ezigbo arụmọrụ na ala slump ịnọgide na-enwe, iji hụ na arụmọrụ nke ihe, na-enweghị emetụta nkịtị condensation nke ihe.
4.Good adhesion: Ime ihe na-arụ ọrụ nke ọma, na-abụghị nke oyi akwa, na-enweghị nkewa na ọbara ọgbụgba.
5. Ecellent workability: High fluidity, mfe deposing na compacting, na-eme ka ihe na-ebelata viscosity, na-enweghị ọbara ọgbụgba na nkewa, mfe pumping.
6.High ike enwetara ọnụego: Ukwuu na-abawanye n'oge na mgbe ike, mbenata ike ọnwụ. Mbelata nke mgbawa, mbelata na mkpụkọ.
7. Wide adaptability: Ọ bụ dakọtara na nkịtị silicate ciment, silicate ciment, slag silicate ciment na ụdị ọ bụla nke blendings nwere magburu onwe dispersibility na plasticity.
8. Ọdịmma dị mma: obere lacunarate, ala alkali na ọdịnaya chlorin-ion. Ịkwalite ike na ịdịte aka
9. Ngwaahịa enyi na gburugburu ebe obibi: Enweghị formaldehyde na ihe ndị ọzọ na-emerụ ahụ, Enweghị mmetọ n'oge mmepụta.
ngwugwu:
1. Ngwaahịa mmiri: 1000kg tank ma ọ bụ flexitank.
2. echekwara n'okpuru 0-35 ℃, n'ebe dị anya na ìhè anyanwụ.
