Ngwaahịa
PCE dị mma - Polycarboxylate Superplasticizer PCE Liquid Slump Njide Ụdị - Jufu
PCE dị mma - Polycarboxylate Superplasticizer PCE Liquid Slump Njide Ụdị - Nkọwa Jufu:
Polycarboxylate SuperplasticizerPCEỤdị Njide Mkpọtụ Mmiri
Okwu mmalite
Polycarboxylate Superplasticizer bụ ihe ọhụrụ excogitate gburugburu ebe obibi superplasticizer. Ọ bụ ngwaahịa gbadoro anya, mbelata mmiri dị elu kacha mma, ikike njigide slump dị elu, ọdịnaya alkali dị ala maka ngwaahịa ahụ, yana inwe ike dị elu nwetara ọnụego. N'otu oge ahụ, ọ nwekwara ike melite plastic index nke ọhụrụ ihe, nke mere ka mma ịrụ ọrụ nke ihe mgbapụta na-ewu. Enwere ike iji ya mee ihe n'ọtụtụ ebe na premix nke kọmpụta nkịtị, ihe na-agba agba, ike dị elu na ihe dị ogologo oge. Karịsịa! Enwere ike iji ya na ike dị elu yana ihe dị ogologo oge nwere ikike dị mma.
Ihe ngosi
| Ihe | Nkọwapụta |
| Ọdịdị | ìhè odo ma ọ bụ ọcha mmiri mmiri |
| Ọdịnaya siri ike | 40% / 50% |
| Onye na-ebelata mmiri | ≥25% |
| uru pH | 6.5-8.5 |
| Njupụta | 1.10±0.01 g/cm3 |
| Oge mmalite mmalite | -90 - +90 nkeji. |
| Chloride | ≤0.02% |
| Na2SO4 | ≤0.2% |
| Simenti tapawa fluidity | ≥280mm |
Njirimara anụ ahụ & igwe
| Nnwale ihe | Nkọwapụta | Nsonaazụ ule | |
| Ọnụego Mbelata mmiri (%) | ≥25 | 30 | |
| Ọnụego ọbara ọgbụgba na nrụgide nkịtị (%) | ≤60 | 0 | |
| Ọdịnaya ikuku(%) | ≤5.0 | 2.5 | |
| uru njide slump mm | ≥150 | 200 | |
| Oke nke ike mkpakọ(%) | 1d | ≥170 | 243 |
| 3d | ≥160 | 240 | |
| 7d | ≥150 | 220 | |
| 28d | ≥135 | 190 | |
| Usoro nke Mbelata (%) | 28d | ≤105 | 102 |
| Corrosion nke nchara ígwè na-eme ka ọ dị ike | Ọ dịghị | Ọ dịghị | |
Ngwa
1. Mbelata mmiri dị elu: Mgbasa dị mma nwere ike inye mmetụta mbelata mmiri siri ike, ọnụ ọgụgụ mbelata mmiri nke ihe karịrị 40%, ọ na-enye nkwa iji melite arụmọrụ na ike nke ihe, na-echekwa ciment.
2.Easying iji chịkwaa mmepụta ihe: Ịchịkwa oke mbelata mmiri, plasticity na ikuku entraining site n'ịgbanwe ịdị arọ nke molekul nke isi ihe, ogologo na njupụta nke n'akụkụ akụkụ, ụdị nke agbụ n'akụkụ.
3. Elu slump njigide ikike: Magburu onwe slump njigide ikike, karịsịa nwere ezigbo arụmọrụ na ala slump ịnọgide na-enwe, iji hụ na arụmọrụ nke ihe, na-enweghị emetụta nkịtị condensation nke ihe.
4.Good adhesion: Ime ihe na-arụ ọrụ nke ọma, na-abụghị nke oyi akwa, na-enweghị nkewa na ọbara ọgbụgba.
5. Ecellent workability: High fluidity, mfe deposing na compacting, na-eme ka ihe na-ebelata viscosity, na-enweghị ọbara ọgbụgba na nkewa, mfe pumping.
6.High ike enwetara ọnụego: Ukwuu na-abawanye n'oge na mgbe ike, mbenata ike ọnwụ. Mbelata nke mgbawa, mbelata na mgbawa.
7. Wide adaptability: Ọ bụ dakọtara na nkịtị silicate ciment, silicate ciment, slag silicate ciment na ụdị ọ bụla nke blendings nwere magburu onwe dispersibility na plasticity.
8. Ọdịmma dị mma: obere lacunarate, ala alkali na ọdịnaya chlorin-ion. Na-eme ka ike dị ike na ịdịte aka
9. Ngwaahịa enyi na gburugburu ebe obibi: Enweghị formaldehyde na ihe ndị ọzọ na-emerụ ahụ, Enweghị mmetọ n'oge mmepụta.
ngwugwu:
1. Ngwaahịa mmiri: 1000kg tank ma ọ bụ flexitank.
2. echekwara n'okpuru 0-35 ℃, n'ebe dị anya na ìhè anyanwụ.
Foto nkọwa ngwaahịa:
Ntuziaka ngwaahịa emetụtara:
Iji bụrụ ogbo nke ịghọta nrọ nke ndị ọrụ anyị! Iji wuo otu ndị nwere obi ụtọ, dị n'otu na ndị ọkachamara karịa! To reach a mutual profit of our customers, suppliers, the society and ourself for Good Quality PCE - Polycarboxylate Superplasticizer PCE Liquid Slump Retention Type – Jufu , The ngwaahịa ga-ezitekwara n'ụwa nile, dị ka: Roman, Stuttgart, Malaysia, Iji na-arụ ọrụ na ndị na-emepụta ihe dị mma, ụlọ ọrụ anyị bụ nhọrọ kacha mma. Nabata gị nke ọma ma meghee oke nkwukọrịta. Anyị bụ ezigbo onye mmekọ nke mmepe azụmahịa gị ma na-atụ anya imekọ ihe ọnụ gị nke ọma.
Site na Louise si India - 2018.12.14 15:26 Ọrụ zuru oke, ngwaahịa dị mma na ọnụ ahịa asọmpi, anyị nwere ọrụ ọtụtụ oge, oge ọ bụla na-enwe obi ụtọ, ịchọrọ ịnọgide na-enwe!
Site na Jocelyn si America - 2017.07.07 13:00 
