nke China Industrial Grade High viscosity Methylcellulose 98% Min White Putty Powder Manufacturer and Supplier |Jufu

Ngwaahịa

98% Hydroxypropyl Methyl Cellulose HPMC/HEC/MHPC Cement Mortar Retarder White Powder 400mPa.s

Nkọwa dị mkpirikpi:

Hydroxypropyl methylcellulose, nke a makwaara dị ka hypromellose, bụ otu n'ime ethers nke na-abụghị ionic cellulose. Ọ bụ ọkara synthetic, adịghị arụ ọrụ, polymer viscoelastic, nke a na-ejikarị dị ka mmanụ mmanu na ophthalmology, ma ọ bụ dị ka onye na-enye ume ma ọ bụ onye na-emepụta ọgwụ ọnụ.
Ọ na-agbaze na mmiri na ụfọdụ ihe mgbaze, dị ka ethanol / mmiri, propanol / mmiri n'ụzọ kwesịrị ekwesị.Ihe ngwọta mmiri nwere ọrụ elu.Nnukwu nghọta na arụmọrụ kwụsiri ike.Nkọwa dị iche iche nke ngwaahịa nwere okpomọkụ gel dị iche iche na mgbanwe solubility na viscosity.Na ala viscosity, ka ukwuu solubility.Nkọwapụta dị iche iche nke HPMC nwere arụmọrụ dị iche iche.Mgbasa nke HPMC na mmiri adịghị emetụta pH.

纤维素 (27)


  • Okwu:HEMC
  • Ọdịnaya siri ike:98%
  • Ọrụ:Nkwụghachi azụ
  • Ọdịdị:Ọcha ntụ ntụ
  • Uru pH:5-8
  • Viscosity:400mPa.s
  • Ọdịnaya Hydroxypropyl:8-16%
  • Ụdị:Ụlọ ọrụ mmepụta ihe
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    NGWA Nkọwapụta
    Ọdịdị Ọcha ntụ ntụ
    Okpomọkụ ire ere 200min
    Ọdịnaya siri ike 98%
    Okpomọkụ mgbanwe agba 190-200 ℃
    Viscosity 400mPa.s
    Uru PH 5-8
    Njupụta 1.39g / cm3
    Okpomọkụ carbonization 280-300 ℃
    Ụdị Ụlọ ọrụ mmepụta ihe
    Esemokwu dị n'elu 42-56dyne/cm maka 2% ngwọta mmiri

    Ọrụ Hydroxypropyl Methylcellulose:

    1. Ụlọ ọrụ na-ewu ihe: Dị ka onye na-ejigide mmiri na retarder nke ciment mortar, ọ na-eme ka ngwa ngwa na-agbapụta.A na-eji ya dị ka ihe nkedo na plasta, plasta, putty powder ma ọ bụ ihe ụlọ ndị ọzọ iji kwalite mgbasa na ịgbatị oge ọrụ.Enwere ike iji ya mado taịlị seramiiki, mabụl, ihe ịchọ mma rọba, ihe nkwalite mado, ma nwee ike belata ọnụ ọgụgụ ciment.The mmiri njide Njirimara nkeHPMCgbochie slurry ka ọ ghara ịgbawa n'ihi ihicha ngwa ngwa mgbe ngwa ngwa, ma welie ike mgbe ọ gbasịrị.
    2. Ụlọ ọrụ mmepụta ihe seramiiki: a na-ejikarị eme ihe dị ka onye na-ekekọta ihe na-emepụta ngwaahịa seramiiki.
    3. Ụlọ ọrụ mkpuchi: Dị ka onye na-agba agba, na-ekesa na stabilizer na ụlọ ọrụ mkpuchi, ọ nwere ezigbo ndakọrịta na mmiri ma ọ bụ ihe mgbaze organic.Dị ka ihe na-ewepụ agba.
    4. Mbipụta ink: Dị ka onye na-agba agba, na-ekesa na stabilizer na ụlọ ọrụ ink, ọ nwere ezigbo ndakọrịta na mmiri ma ọ bụ ihe mgbaze organic.
    5. Plastics: eji mee ihe dị ka ihe ntọhapụ ebu, ihe nro, lubricants, wdg.
    6. Polyvinyl chloride: A na-eji ya dị ka onye na-ekesa na mmepụta nke polyvinyl chloride na bụ isi ihe inyeaka maka nkwadebe nke PVC site na nkwụsịtụ polymerization.
    7. Ụlọ ọrụ na-emepụta ọgwụ: ihe mkpuchi;ihe nkiri;ihe na-achịkwa ọnụ ahịa polymer maka nkwado nkwado ntọhapụ;stabilizers;ndị ọrụ nkwụsị;mbadamba mbadamba;ndị na-amụba viscosity
    8. Ndị ọzọ: A na-ejikwa ya na akpụkpọ anụ, ụlọ ọrụ mmepụta akwụkwọ, nchekwa mkpụrụ osisi na akwụkwọ nri na ụlọ ọrụ akwa.

    纤维素 (4)

    Ụzọ mgbasa Hydroxypropyl methylcellulose:

    1. Enwere ike ịgbakwunye ụdị niile na ihe site na ịgwakọta akọrọ.
    2. Mgbe ọ dị mkpa ka a gbakwunye ya ozugbo na ngwọta mmiri na-ekpo ọkụ na ụlọ okpomọkụ, ọ kacha mma iji ụdị mgbasa ozi mmiri oyi, ọ na-ewekarị 10-90 nkeji ka ọ gbasaa mgbe ọ gbakwụnyere.
    3. Maka ụdị ndị nkịtị, buru ụzọ kpalie ma gbasaa na mmiri ọkụ, wee gbakwunye mmiri oyi iji kpalie ma dị jụụ igbari.
    4. Ọ bụrụ na agglomeration na wrapping eme n'oge mgbasa, ọ bụ n'ihi na-ezughị ezu ịkpali ma ọ bụ nkịtị ụdị na-agbakwunyere ozugbo na mmiri oyi.N'oge a, a ga-akpali ya ngwa ngwa.
    5. Ọ bụrụ na a na-emepụta egosipụta n'oge mgbasa, enwere ike ịhapụ ha ka ha guzoro maka awa 2-12 (a na-ekpebi oge a kapịrị ọnụ site na nkwụsị nke ngwọta) ma ọ bụ wepụ ya site na agụụ, pressurization, wdg, ma ọ bụ ihe kwesịrị ekwesị nke defoamer. enwere ike ịgbakwunye.

    纤维素 (12)

    Onye ahịa:

    Kemgbe e guzobere, ihe karịrị otu narị ụlọ ọrụ abịala n'ụlọ ọrụ anyị maka nleta saịtị.Ndị ahịa anyị gbasara Canada, Germany, Peru, Singapore, India, Thailand, Israel, UAE, Saudi Arabia, Nigeria, wdg. Ihe ndị dị mkpa mere na-adọta ndị ahịa ka ha nwee nleta bụ ngwaahịa na ọrụ dị elu, ụlọ ọrụ a ma ama na aha ọma. , nnukwu atụmanya mmepe ụlọ ọrụ.N'ụbọchị na-abịa, ndị Jufu na-anabata ndị mmekọ azụmahịa ka ha bịa kparịta imekọ ihe ọnụ

    阿联酋 (2)

    Ajụjụ:

    Q1: Gịnị kpatara m ga-eji họrọ ụlọ ọrụ gị?

    A: Anyị nwere ụlọ ọrụ mmepụta ihe na ndị injinia ụlọ nyocha.A na-emepụta ngwaahịa anyị niile na ụlọ ọrụ mmepụta ihe, ya mere enwere ike ijide n'aka na ịdị mma na nchekwa;anyị nwere ọkachamara R & D otu, mmepụta otu na ahịa otu;anyị nwere ike ịnye ezigbo ọrụ na ọnụahịa asọmpi.

    Q2: Kedu ngwaahịa anyị nwere?
    A: Anyị na-emekarị na-emepụta ma na-ere Cpolynaphthalene sulfonate, sodium gluconate, polycarboxylate, lignosulfonate, wdg.

    Q3: Kedu ka esi akwado àgwà ngwaahịa tupu ịnye iwu?
    A: Enwere ike ịnye nlele, ma anyị nwere akụkọ nyocha nke ụlọ ọrụ nyocha nke ndị ọzọ nyere ikike.

    Q4: Gịnị bụ kacha nta ka ibu maka OEM / ODM ngwaahịa?
    A: Anyị nwere ike hazie gị aha dị ka ngwaahịa ị chọrọ.Biko kpọtụrụ anyị ka ika gị na-aga nke ọma.

    Q5: Gịnị bụ oge nnyefe / usoro?
    A: Anyị na-ebufekarị ngwongwo n'ime 5-10 ụbọchị ọrụ mgbe ị kwụrụ ụgwọ.Anyị nwere ike kwupụta site na ikuku, site n'oké osimiri, ị nwekwara ike ịhọrọ onye na-ebugharị ibu gị.

    Q6: Ị na-enye ọrụ mgbe-ahịa?
    A: Anyị na-enye ọrụ 24 * 7.Anyị nwere ike ikwu okwu site na email, skype, whatsapp, ekwentị ma ọ bụ ụzọ ọ bụla ị ga-esi dị mma.


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya